Turntable ECONOMIC
110lb/50kg 0.5rpm B12
Ref. FdSB12MV05
166.00 € HT
199.20 € TTC
The ECONOMIC B12M built-in motor unit is designed for direct integration into a structure and can rotate loads up to 50 kg.
This version provides slow rotation at 0.5 rpm clockwise when viewed from above and is supplied unwired for 230 Vac
Read more
Slow rotation for custom integration
This ECONOMIC B12M version operates at a fixed speed of 0.5 rpm. The motor unit is designed to be built into and wired directly within the structure, leaving freedom to design the support or scenery around the rotating mechanism.
Useful integration information:
- 3 M5 holes on the rotating section;
- 3 M5 holes on the fixed section;
- Safety release;
- Supplied unwired for 230 Vac;
- Power cord available separately;
- White painted finish;
- For indoor use.
Drive capacity must be checked according to the weight, diameter and height of the load, using the chart available in the ECONOMIC B12 documentation.
- You want a power cord here
FAQ
This version operates at a fixed speed of 0.5 rpm clockwise when viewed from above. It is one of the slower-speed configurations available in the B12M range.
No. It is supplied unwired for 230 Vac. A power cord is available separately.
This version is a motor unit designed for direct integration into a structure. It must be built into and connected within the installation receiving the rotating mechanism.
Characteristics
Documentations
| Charge capacité | : | 50 kg |
| Speed rotation | : | 0.5 rpm tr/min |
| Sens of rotation | : | Clockwise |
| Power supply | : | 230 Vac |
| Ø rotating part | : | 120 mm |
| Ø part base | : | 120 mm |
| Height | : | 56 mm |
| Diameter | : | 118 mm |
| Destination | : | ECONOMIC |
Personalise
If no product listed, go back to "no filter"