Motorized rotary platform Ø 340 mm
ATLAS ATSB 2.8 rpm - 500kg
Ref. ATSB
The ATLAS ATSB direct-drive rotary unit is a motorized rotary platform designed to rotate loads of up to 500 kg, including people in motion.
It is particularly suited to projects requiring high rotational force. Its industrial motor and special-steel construction make it a robust motion system.
Designed for indoor use, it can be integrated into an existing set or combined with a stable structure, steel arms and an MDF platform to create a complete rotating platform.
Its speed is variable up to 2 rpm, with reversible rotation.
Other diameters are available: use the “Customise” search tool below.
Easy to integrate
The ATLAS ATSB unit features compact dimensions, making it suitable for integration into a wide range of rotating applications. The rotating part has a 340 mm diameter, with a 480 mm base and a 290 mm height.
A system to be completed to create a rotating platform
The ATLAS ATSB is a motorised drive component and does not constitute a complete platform on its own. It can be used in two ways: integrated directly into an existing set, with four-point floor anchoring, or installed as a standalone system. In the latter configuration, it is combined with a solid MDF platform, available in several dimensions, its cut-to-size 8-arm support, and a steel support structure providing overall stability. [Solid MDF platform — link to be added] [Multi-arm support — link to be added]
The required power supply is 230 V AC single-phase / 230 V three-phase, not supplied.
Designed for moving loads
The ATLAS ATSB unit uses a direct-drive system without disengagement, making it particularly suitable for moving loads requiring high driving torque, such as people, dancers or performers. Direct drive means that the motor transfers its motion directly to the rotating part, without an intermediate mechanical transmission. Torque refers to the force available to start a load rotating and keep it moving.
A resistance rating to consider for offset loads
The specified resistance is 120 kg at 1 m. This value should be taken into account when the load is positioned away from the axis of rotation: the further the load is offset, the greater the stress placed on the drive unit. This is therefore an important factor to consider when designing the installation.
Adjustable rotation speed
The rotation speed is variable from 0 to 2 rpm and can be adjusted using a speed controller. Rotation is available in both directions.
FAQ
| Charge capacité | : | 500 kg |
| Speed rotation | : | Variable speed tr/min |
| Sens of rotation | : | Two-way |
| Power supply | : | Tri 230 Vac |
| Ø rotating part | : | 340 mm |
| Ø part base | : | 480 mm |
| Height | : | 290 mm |
| Diameter | : | 480 mm |
If no product listed, go back to "no filter"

