Car turntable 3 t
Ref. PV3000L
Showcase a vehicle weighing up to 3,000 kg dynamically, without the need to install a full platform.
Compact and ready to use, the EXCELL PV3000L turntable brings a car’s presentation to life in a showroom, dealership, motor show or 360° photo studio.
Occupants can remain on board whilst the turntable rotates.
[details]
A turntable designed for automotive presentation
The PV3000L can rotate a vehicle weighing up to 3,000 kg at a speed of 0.8 rpm. Its design offers an alternative to rotating platforms: the vehicle rests directly on the device, thereby minimising the space required for installation in the display area.
Intended for indoor use, it is particularly suitable for showrooms, car dealerships, trade fairs and 360° photography studios. Rotation is clockwise and occupants can remain in the vehicle whilst it is in operation.
A ready-to-use systemThe turntable is fitted with a central hub and a safety clutch. Its 230 Vac / 50 Hz power supply makes it easy to use in professional environments with a standard mains supply.
With a height of 160 mm, the PV3000 has a minimal profile beneath the vehicle. Its hammered-finish paintwork is well-suited to its use as presentation equipment.
Check compatibility with the vehicle
When choosing a turntable, consideration must be given not only to the vehicle’s weight but also to its dimensionsFor the PV3000L, the permissible wheelbase is between 2.42 and 3.70 m and the track width between 1.15 and 2.12 m.
These dimensions must be checked before selecting this model.
FAQ
The PV3000 is designed to showcase vehicles weighing up to 3 tons in automotive showrooms, dealerships, trade shows, museums and 360° photography studios
The vehicle rests directly on the rotating system, providing a compact and professional display solution while reducing the installation footprint
Compatibility depends on:
vehicle weight;
wheelbase;
track width.
For the PV3000, the wheelbase must be between 2.20 m and 3.20 m and the track width between 1.10 m and 2.10 m. These values should be verified before ordering.
vehicle weight;
wheelbase;
track width.
For the PV3000, the wheelbase must be between 2.20 m and 3.20 m and the track width between 1.10 m and 2.10 m. These values should be verified before ordering.
The PV3000 provides a compact and ready-to-use solution for showcasing a vehicle during exhibitions, trade shows and commercial presentations. Because the vehicle rests directly on the system, there is no need to install a complete rotating platform, reducing costs associated with flooring, decoration, transport and handling
Characteristics
| Speed rotation | : | 0.8 rpm tr/min |
| Sens of rotation | : | Clockwise |
| Power supply | : | 230 Vac |
| Height | : | 160 mm |
Personalise
If no product listed, go back to "no filter"

